Multi punched posts allow for height adjustment if required

Each Ground Mount kit contains 2x Plated Posts and 1 x Back Bar

Fittings supplied: 2x M6x90mm bolts, 2x M6x60mm bolts, 8x M6x16mm washers, 4x M6 nuts

You will require: 8x M6 galvanised masonry screws/screw bolts (min. embedment 45mm), 8x M6 galvanised washers, safety glasses, hammer drill, 6mm masonry bit, packers (if sloped ground), 2x 10mm spanners/sockets, spirit level, tape measure, knife, pencil.

Note: For larger M8 fixings use 8mm masonry bit & 13mm spanners. Refer to Manufacturer’s TDS (Technical Data Specifications) for further information.

Optional 2.4m Ground Mount Kit available for in ground installation