Multi punched posts allow for height adjustment if required.

Each Ground Mount Kit contains 2x Plated Posts (welded base plate) and 1x Back Bar

Fittings supplied: 2x M6x90mm bolts, 2x M6x60mm bolts, 8x M6x16mm washers, 4x M6 nuts

You will require: 8x M6 galvanised masonry screws/screw bolts (min. embedment 45mm), 8x M6 galvanised washers, safety glasses, hammer drill, 6mm masonry bit, packers (if sloped ground), 2x 10mm spanners/sockets, spirit level, tape measure, knife, pencil

Note: For larger M8 fixings use 8mm masonry bit and 13mm spanners. Refer to Manufacturer’s TDS (Technical Data Specifications) for further information.

Optional 3.3m Ground Mount Kit available for in ground installation